Announcement

Collapse
No announcement yet.

DumpSec wont connect

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • kstanush
    replied
    Re: DumpSec wont connect

    If it won't connect with the hostname, but will with the ip address, then its a name resolution problem. I assume that you would have the same issue with any other remote management utility. Mapping a drive is a bit different.

    You can try using a utility like rmtshare, for example, to see if it gets a similar error.

    Leave a comment:


  • qnorth
    replied
    Re: DumpSec wont connect

    Thanks. The name is right since i was able to map to an admin share on the machine. It still wont connect with the host name to DumpSec but the ip address worked. I suppose i can use this as a work around for now - but any ideas why it wont connect with the host name?

    Leave a comment:


  • kstanush
    replied
    Re: DumpSec wont connect

    That appears to be a network path not found error. Make sure that the computer name or ip address can be resolved. Can you manage this same computer in Hyena or some other utility to see if you have a name resolution problem ?

    Leave a comment:


  • qnorth
    started a topic DumpSec wont connect

    DumpSec wont connect

    When using dumpsec to try and connect to a different domain, i get this error:

    Error in processing, NetServerGetInfo status=x00000035

    Experienced this problem in 2.8.2 and 2.8.5
    My id is setup as a domain admin on that domain, any ideas as to why it wont connect?
Working...
X