Announcement

Collapse
No announcement yet.

Hyena with two public networks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hyena with two public networks

    I work for a school system we run two publicly addressed networks connected by dedicated DSL. How can I configure Hyena so I can view both networks from one workstation? My workstation is attached to 192.168.1.0 the other network is 192.168.2.0, 192.168.1.254 is the link to the DSL router with 192.168.2.1 as the gateway on the other end. Do I need to enter a complete static route somewhere?

  • #2
    Re: Hyena with two public networks

    Actually, Hyena doesn't have anything to do with this, but rather depends on NT for communication. I would recommend checking the usual connection issues, like routing, resolution, etc.

    You can try adding one of the remote computers by IP address into Object Manager under File->Manage Object View. If you are able to administer it that way, you may have a name resolution issue.

    Comment

    Working...
    X